News

LP-8WP60E Water Repellent For Cement-based Additive Chemical Name:  Water Repellent For Cement-based Additive   Description special emulsion of silane / siloxane composite, which can be integrated into the mortar for waterproofing. And Surface coating on the surface of the substrate can produce a good hydrophobic effect.   Features Low dosage ,excellent effect Low VOC, easy to use, environmentally friendly   Technical index    equivalent as DOWSILTM IE 6683 Emulsion Appearance Milky white liquid Active Content(%) 50-52 PH 6.0-8.0 Density(25℃g/cm3) 0.95-1.05   Application Use as admixture in concrete or mortar Surface coating of concrete and mortar substrate products Other surface coating of cement-based products (such as cement fiberboard, etc.)   Use guide It is recommended to use 0.05-0.4% of the whole weight cement-based products. Generally, 0.2% can produce excellent results. When used as surface waterproofing treatment, We recommend an active substance content of 5-10% (dilute the product in the ratio 1:4 to 1:9), the exact figure depending on how absorbent the substrate is. Brush or spray the substrate, make substrate fully wet. After the construction, substrate need 2~3 days protection ensure to silicone resin fully cured.   Package & Storage& Shelf life 200L, IBC. Store at 5℃-35℃ under cool, dry environment 12 months                                         

LP-8WP89E Water Repellent For Coating Additive   Chemical Name:  Water Repellent For Coating Additive   Description A water repellent for coating. By adding 8WP89E, the waterproofness and water resistance of the coating can be improved and the surface lotus leaf hydrophobic effect can be achieved.   Technical index    Equivalent as DOWSILTM IE-7170 Appearance Milky white liquid Active Content(%) Approx.55 PH 7.0-9.0 Density(25℃g/cm3) 0.95-1.00   Application Silicone resin emulsion coating Acrylic emulsion coating Exterior coating   Package & Storage& Shelf life 200L, IBC. Sealed storage under 5-30℃, Avoid contact with acids and alkali substance. 12 months.  

LP-8WP4065 Waterproofing agent For textile industry    Chemical Name:  Waterproofing agent For textile industry   Description -Silicone waterproof emulsion -Moisture volatilization can form film, has excellent water resistance, keep the fabric breathability -Can improve the water transfer effect of the substrate on the water beads, the substrate is not easy to be wetted, and the water resistance is improved   Features Low dosage ,excellent effect Low VOC, easy to use, environmentally friendly Technical index    equivalent as DOWSILTM IE-8749   Appearance white milky liquid Active Content(%) 63-67 PH 10-11.5 Emulsion type cationic type   Application - textile industry   How to use: -Can be heat-cured according to existing factory conditions in order to fully set the fabric for optimal protection Water and durability, it is recommended to add closed isocyanate crosslinker and penetrant to the prepared finishing solution. -This product has not been tested or stated for medical use. Keep away from sparks, open flames, heat sources, etc   Package & Storage& Shelf life 200L, IBC. Store at 0℃-36℃ under cool, dry environment 12 months   

  LP-8WPF401 Fluorine-free and water-repellentFor Textiles and leather, Textile finishing, Waterproof fabrics. Chemical Name: Water Repellent For Cement-based Additive Description A water-based silicone-modified fluorine-free water-repellent emulsion with nano-meter particle size. It can be diluted with water and used directly at room temperature. Features 1.Especially suitable for applications that require both waterproofness and softness, such as clothing for outdoor purpose.2. It can provide woven fabrics and knitwear excellent water droplet roll-off properties, making them very soft, drapeable and elastic to the touch. 3. It can improve the washing and wear properties of fabrics, crease recovery angle, sewing properties and tear strength.   Application Application areas: Textiles and leather, Textile finishing, Waterproof fabrics.Padding process: When using, dilute with deionized water to a certain concentration, 30-80g/L depending on the specific fabric, dry and set at 150-180°Cx0.5-3min. If 6-10g/L cross-linking agent is added to the finishing solution, it can not only further improve the waterproof level, but also improve the wash resistance. The specific method can be determined according to actual needs.

308-Single component silicone oil emulsion for polyester staple fiber (three-dimensional hollow curly)- finishing agent   Product characteristics 308 is our newest single component silicone oil emulsion for polyester steple fiber,JY-308 contains many of the faculties groups, it can make the polyester fiber excellent fluffy, rebound resilience, smooth, soft, good handling feeling and high anti-static characteristics, the hollow fiber will be more white and bright after using the finishing agent.   The main technical index Appearance milky white liquid Solid content（%） 58-60 Ionic character non-ionic   Working liquid component silicone oil emulsion with water Suggested working liquid concentration ratio (original products: water) : 1：8 ~ 20  Oiling rate %:  0.3- 0.6    Working liquid compounding method 1) according to the concentration and the proportion of the total amount of the expected liquid, calculate the weight of JY-308 and water, 2) pouring the needed amount of water into the kettle and start mixing, then pouring the weighted JY308 and stir them about 15 minutes to dispersed evenly, 3) stopping mixing and storing the working liquid in storage tank for using, 4) heating is not needed during the working liquid preparation, room temperature water is advisable, 5) preparated liquid should be used during 12 to 24 hours.   Oiling way The finishing agent using the spray or the combination of dipping and spraying oiling method, either of them can achieve satisfactory finishing effectation.   The fiber heating setting process requirement  Oiled curly tow, short fibers must to be done heating setting processing. Suggesting temperature 150 ℃ ~ 170 ℃, retention time 10 min ~ 15 min, of course, concrete process parameters determined by fiber manufacturers.    The product security no bad reaction to human skin in using procession, but please wash with a lot of clean water if it splash into eyes.   Packaging and shipping quality 1), with 50 L or 200 L clean airtight plastic packaging, 2), stored in a ventilated shady and cool place, storage temperature 0 ~ 35 ℃. Storage period for half a year, 3), according to the non-dangerous goods shipment.

LP-5681 LP-5681 Transparent polyether modified polydimethylsiloxane wetting agent with defoaming function for Epoxy (Silicone surface control agent, silicone surfactant, wetting agent) Chemical composition： polyether modified polydimethylsiloxane Physical and chemical data reference Appearance: Transparent light amber liquid Density 20°C g/cm3:0.95 ~ 1.0 Viscosity 25℃ (cs) : 20~45 Refractive index 25℃ : 1.440~1.445 Water soluble: dispersed in water Surface tension 25℃(mN/m) : ≤25 Active ingredient (%) : 100 Manily Application: This product is a wetting agent with defoaming function. Functions include: 1. Strong reduction of dynamic and static surface tension; 2. Improve the wettability of the substrate, promote spreading, resist oil, prevent shrinkage, and improve leveling; 3. Excellent resin miscibility, universal water and oil, with a certain degree of defoaming; 4. High performance. Very low amount of addition can have a very good effect, is a new efficient organosilicon auxiliary. This product is suitable for ink, plastic, metal and wood decoration, epoxy resins and industrial coatings. As a wetting agent and adhesion enhancer in water-based, UV curable, traditional solvent-based and high solid content coatings, it also improves flow and leveling, recoating and gloss retention. The performance is particularly good in water-based PU system. This product is soluble in methanol, isopropyl alcohol, acetone, xylene and dichloromethane, and can be dispersed in water. Application suggestion Recommended dosage: 0.1-1.0% of the total formula Adding method: It can be added when grinding or stirring, or after the end of production. In order to facilitate the addition can be diluted with a suitable solvent. Solvent type: water, alcohols, alkanes, aromatics can be diluted at any rate. Applicable coating system: Oil-based system； solvent-free system； Water-based system Matters needing attention： Beware of mixing with other additives. Packing and storage： This product can be transported and stored as non-hazardous chemicals. Packing specifications are 25Kg plastic drums, 200Kg plastic drums, or customized according to user requirements. Store in a cool and dry place. Shelf life is 12 months. packed with 25L, 200L plastic drum or 1000L container. be stored in ventilation, should be stored in a cool place, the temperature is below 25℃, prevent freezing. The storage period is six months. Different defoamer for different industries LP-500 Defoaming agent for metal working LP-510 Defoaming agent for textile production LP-520 Defoaming agent for paper making LP-530 Defoaming agent for coating and painting LP-540 Defoaming agent for pesticides LP-550 Defoaming agent for water treatment LP-560 Defoaming agent for fermentation LP-570 Defoaming agent for concrete LP-580 Silicone defoamer for gas recovery industry LP-590 Silicone defoamer for polymer systems and conventional surfactant LP-5132 Silicone Antifoam Compound for detergent like Household & Cleaning Solutions

LP-921 improves mar resistance and slip in water-borne systems or solvent-borne systems containing polar solvents; provides water resistance in water-borne systems; also imparts leveling, wetting and gloss. Features & benefits: Imparts slip and mar resistance Composition: Ultra high molecular weight polydimethylsiloxane dispersion in paste form Technical index: Test Unit Result Nonvolatile content % 77~82 Solvent Water Specific Gravity at 25°C (77°F) 0.980 Flash Point, closed cup °C (°F) >101 (>214) Viscosity at 25°C (77°F) cs 200,000-700,000 Usage: LP-921 is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. LP-921 is generally effective at concentrations ranging from 0.05 to 3.0 weight percent, based upon total formulation. This additive can be added during the grind, let down or be post-added. Characteristics may vary when used with different systems and formulations. LP-921 is compatible with acrylic, alkyd, epoxy, nitrocellulose, polyesters, polyurethane and vinyl systems. Thorough preproduction testing is necessary to ensure expected performance. Application: LP-921 reduces coefficient of friction, provides antiblocking and improves mar resistance. coating, painting and ink.

PCHI Personal care and homecare ingredients   We gather once a year. We meet in one session. From March 20 to 22, 2024 China International Cosmetics Personal and Home Care Products Raw Materials Exhibition (PCHi) is held at the Shanghai World Expo Exhibition and Convention Center, with 780+ global cosmetics leaders, 100+ industry senior coffee, 30000+ professional visitors, to jointly start a new journey in the beauty industry.   As the silicone chemical for cosmetic,  we have different series like: Volatile silicone oil Low viscosity silicone oil Silicone elastomer Silicone resin Modified silicone oil Silicone oil for hair care Oil-soluble silico wax

After the spring of the epidemic, the global agrochemical people are looking forward to the industry event - the 23rd China International Agricultural Chemicals and Plant Protection Exhibition (CAC2023), held in May 23-25, 2023 at the National Convention and Exhibition Center (Shanghai), the 13th China International New Fertilizer Exhibition (FSHOW2023), The 23rd China International Agrochemical Equipment and Plant Protection Equipment Exhibition (CACE2023) was held at the same time. we advantage on agriculture industry is different silicone adjuvant (spreading ) agent and defoamer agent.  solid powder silicone spreading adjuvant for agriculture chemicals---for WP/GR/WDG/SP silicone spreading adjuvant for agro-chemicals (water based)------CAS:67674-67-3 silicone spreading adjuvant for agro-chemicals (water based)-----CAS:134180-76-0 silicone penetration adjuvant for agro-chemicals (water based)---CAS:27306-78-1 silicone surfactant adjuvants for oil-based pesticide formulations---CAS:17955-88-3   silicone defoamer for pesticides polyether defoamer for pesticides preparations solid defoamer for fertilizer production                     polyether defoamer for foliar fertilizer

This personal care silicone product is carefully designed and produced by our company to provide users with a high quality personal care experience. This product is made of high quality silicone material, with soft, durable, non-toxic and tasteless characteristics. It can be widely used in the field of daily personal care, such as facial cleaning, massage and relaxation. Compared with traditional personal care products, this silicone product has unique advantages. First, its soft properties make the user feel more comfortable and gentle to the touch, while ensuring effective cleaning or massage without causing irritation to the skin. Secondly, due to the use of high-quality silicone material made of the product is very durable and easy to clean and maintain, can be used for a long time without losing the original effect. In addition to the above mentioned features, this personal care silicone product also has other highlights that attract consumers' attention. For example, the design takes into account the needs of users, and combines engineering principles to improve; In addition, environmental protection and health and safety issues are paid attention to in the production process, and tested and verified by relevant certification bodies. In short, our company is committed to providing users with the best choice of products, and will continue to improve to meet the market demand. PDMS Silicone fluid, Silicone Emulsion, Silicone defoamer

Polydimethylsiloxane, which is also known as dimethylsilicone oil, PDMS silicone fluid, according to the relative molecular weight of different, the appearance of colorless transparent volatile liquid extremely high viscosity liquid or silica gel, odorless, high transparency, heat resistance, cold resistance, viscosity changes with temperature, water resistance, surface tension is small, with thermal conductivity, thermal conductivity of 0.134-0.159W/(m·K), Light transmittance of 100%, dimethylsilicone oil is non-toxic and tasteless, with physiological inertia, good chemical stability. Electrical insulation and weather resistance, good hydrophobicity, and has a high shear resistance, can be used at -50℃ ~ 200℃ for a long time. With excellent physical properties, it can be directly used for moisture-proof insulation, damping, shock absorption, defoaming, lubrication, polishing, etc. It is widely used as insulation lubrication, shock proof, oil dust proof, dielectric fluid and heat carrier. And used as defoaming, release agent, paint and daily chemical additives. Polydimethylsiloxane can be mixed with lanolin, stearyl alcohol, cetyl alcohol, glyceryl monostearate, tweens, Spant and other surfactants to be used as emulsion matrix. Adding film forming agents such as PVP, PVA and cellulose derivatives into this product can enhance its protection. The drug release and skin penetration performance is faster than that of dolphin fat, lanolin and petroleum jell. The polydimethylsiloxane can be used to produce Silicone Emulsion, Silicone defoamer, different Silicone adjuvants and so on. We have different items as following: Items Viscosity Density Volatile matter Flash Point mPa·s g·cm^(-3) (150°C,3h)% °C 0.65 0.65 1 1 2 2 3 3 5 5 10 10 50 50 0.96 ≤1.0 ≥270 100 100 0.965 ≤0.7 ≥290 350 350 0.97 ≤0.5 ≥315 500 500 0.97 ≤0.5 ≥315 1000 1000 0.975 ≤0.5 ≥315 3000 3000 0.975 ≤0.5 ≥315 11000 11000 0.975 ≤0.5 ≥315 12500 12500 0.975 ≤0.5 ≥315 50000 50000 0.976 ≤0.5 ≥315 60000 60000 0.976 ≤0.5 ≥315 100000 100000 0.976 ≤1.5 ≥315 500000 500000 0.978 ≤1.5 ≥315

Latest price: January 15, silicone DMC price 14640 yuan / ton, compared with the previous working day, basically flat. Analysis: On January 15, the silicone DMC market as a whole showed stable and tidy operation. The domestic silicone DMC market price is around RMB 14600-15000/ton. The supply of silicone DMC in the market is slightly tight and the supply and demand conduction is improved. Future market forecast: Currently, silicone DMC market overall atmosphere is mild, the attitude of the industry has improved, the downstream inquiry atmosphere has improved, is expected to be short-term, the domestic silicone DMC market is mostly stable in strong operation. It is the time for confirming orders of silicone material like silicone emulsion, silicone defoamer, different silicone oil now.

What is silicone adjuvant? We are a silicone chemical manufacturer. Our main products are silicone oil, silicone oil emulsion, silicone defoamer, liquid silicone rubber, silicone release coating, agricultural silicone adjuvant, painting and coating adjuvant, cosmetic silicone raw material and so on. These products are widely applied to petroleum and petrochemical, textile, construction, electronic and electrical, agro-chemicals, automobile, coating, cosmetic and etc. So our silicone adjuvant is applied in agriculture. They improve water use efficiency and nutrient uptake in crop production. Agricultural silicone adjuvants are classified as surfactants that activate pesticides by enhancing their biological activity on pests and bugs. They were developed in the 1970s and have many uses due to the unusual properties of the silicone molecule. Agricultural silicone adjuvant refers to a type of substance that is added to pesticides, herbicides, and other agricultural or horticultural products to enhance their effectiveness. Adjuvants are added to these products to improve their performance by increasing their ability to spread, penetrate, and stick to plant surfaces. Agricultural silicone adjuvant, specifically, are made from silicone-based compounds and are known for their ability to reduce surface tension and increase wetting and spreading properties. This allows the pesticide or herbicide to cover a larger area and adhere better to the target plants, resulting in improved efficacy. Agricultural silicone adjuvants are commonly used in agricultural and horticultural practices to enhance the effectiveness of various crop protection products. If you have any problems, pls fell free to contact me.

How high the performance of the silicone leather 1, compared with ordinary leather, what are the advantages of silicone leather? There are two main advantages of silicone, one is safety and environmental protection, and the other is superior performance. Safety and environmental protection - 100% silicone material does not contain solvents, which is conducive to protecting the environment and health. 2. How is silicone leather made? Silicone leather is a multi-layer structure, coated with multiple layers of silicone material on the substrate, which can be matched with different silicone products according to different application scenarios and needs. 3. What is the performance of silicone leather in stain resistance? According to the test, beautiful special silicone multi-layer synthetic leather, only simple cleaning can achieve excellent stain resistance, which is the unique chemical structure of silicone. 4. What is the stage of product development? What are the outstanding features? From the product point of view, due to the short birth time, silicone leather is still in the initial stage, but there are also relatively mature solutions. The environmental protection, safety, antibacterial, mildew and stain resistance of silicone leather are far superior to traditional materials. 5, how about the permeability and wear resistance of silicone coating? Silicone leather has good air permeability, due to its large intermolecular gap, more conducive to water vapor transmission. It has better breathability compared to traditional leather. Good wear resistance, can meet a variety of application scenarios. 6. How about material properties? Problems to pay attention to when applying Material properties: Feel softer, high and low temperature resistance is very good, has excellent aging resistance, more suitable for outdoor use. Dirt resistant, easy to clean, and more environmentally safe. Silicone is a two-component material, pay attention to the correct mixing ratio, mixing evenly, pay attention to the need for appropriate and sufficient curing conditions.

Changzhou Lucky Power Technology Co., Ltd. is located in Changzhou City, Jiangsu Province, is a focus on new materials, new energy, medicine and health technology company, The company adheres to the core values of "realistic innovation, honest development", takes scientific and technological innovation as the ship, fights the sea of the market, and is committed to providing high quality products and professional services for partners. The company's business mainly involves new materials, new energy, medicine and health three plates. The new materials are mainly based on various production and processing AIDS, and are widely used in the chemical industry as an auxiliary agent, especially in organic synthesis, synthetic material post-treatment and pesticides, coatings, textiles, personal care, electronics, optics and other fields. At the same time, vigorously promote photovoltaic cells, photovoltaic modules, inverters, transformers and other new energy products. Medical health is based on large equipment such as CT, MRI, etc., to provide high-quality medical equipment, strong after-sales guarantee and maintenance services. Products are sold overseas. We have won the recognition and trust of our customers. Innovation leads - technology empowers - change lives. Looking forward to cooperating with you! The main products of the new material is different modified silicone oil, silicone fluid, silicone resin, antifoaming agent and functional silicone chemical for coating, cosmetic, agriculture, textile, silicone rubber and so on.

silicone defoamer for polymer systems LP-590 silicone defoamer is a dilutable defoamer, which is used in conventional surfactant and polymer foaming systems. The key recommended industries are textile printing and dyeing (cotton dyeing), sewage treatment, and industrial cleaning. COMPOSITION:Composed of polysiloxane, modified polysiloxane, silicone resin, silica, dispersing agent, and stabilizing agent. Potential Applications: Conventional surfactant and polymer foaming systems. The key recommended industries are textile printing and dyeing (cotton dyeing), sewage treatment, and industrial cleaning.

Advantages and disadvantages of silicone defoamer Advantages: Strong defoaming ability: silicone defoaming agent can quickly break bubbles, and can significantly inhibit foam and prevent foam regeneration. At the same time, the amount of silicone defoamer is small, and the use range is 1 to 100ppm, which not only has low cost, but also does not pollute the foamed material. Good heat resistance: Taking dimethyl silicone oil as an example, it can be used for a long time in an environment of 150 ° C, and the temperature resistance of up to 300 ° C for a short time, so silicone defoaming agent can be used in a wide temperature range. Stable chemical properties: it is difficult to react with other substances, as long as the preparation is reasonable, it can be used in the system containing acid, alkali and salt. Disadvantages: silicone defoamer is a water-soluble product, and it is difficult to dissolve in the foaming liquid of the oily system, so it has a poor defoamer effect in the oily system. The acid-base range of organic silicon defoamer is limited, and organic silicon defoamer has an acid-base range of use, which will break milk in the system of strong acid and strong base, affecting the use effect.

Silicone defoamer used in conventional surfactant and polymer foaming systems A new kind of silicone defoamer used in conventional surfactant and polymer foaming systems. The key recommended industries are textile printing and dyeing (cotton dyeing), sewage treatment, and industrial cleaning. FRATURES ● The substance components of the antifoam do not contain the substances listed in the SVHC list of the REACH Regulation. ● Antifoaming agent component does not contain NP, APEO. ● The substance composition does not contain substances contained in the ROSH Directive (Restriction on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). COMPOSITION ● Composed of polysiloxane, modified polysiloxane, silicone resin, silica, dispersing agent, and stabilizing agent. TYPICAL PROPERTIES Appearance: White or yellowish uniform liquid emulsion, without irritating odor, any sediment and mechanical impurities Nonvolatile Content(%): 40.0±2.0

LP-8566 Amino Fluid for cosmetic formulations and hair care INCI NAME: Amodimethicone Product features & Benefits: DC-2-8566 1. Stable in a wide range of cosmetic formulations 2. Enable clear shampoo formulations 3. Enables cold process manufacturing 4. Provides smooth, feel to dry hair 5. Improves wet and dry combing 6. Decreases fly-away 7. Improves shine in shampoos 8. Improve color depth and longevity when used in semi-permanent color product 9. Protects hair from heat damage Technical index CTM1 ASTM2 Property Unit Result 0176 Appearance Clear to slightly hazy Color Colorless to pale yellow Content Aminofunctional polydimethylsiloxane Viscosity at 25°C (77°F) mm2/s or cSt 3500 0001A D1298 Specific Gravity at 25°C (77°F) 0.98 Refractive Index at 25°C (77°F) 1.407 Flash Point °C °F 149 300.2 Amine Neutral Equivalent 1600 Nitrogen % 0.875 Application 1. Clear and opaque conditioning shampoos 2. Rinse-off and leave-on conditioners (hot oil treatments, pomades and ethnic care products) 3. Styling aids (mousses, gels, lotions and pomades) 4. Colorants, perms and relaxers. Package and shipment This product is available in 20 kg pails and 200 kg drums. When stored at or below 25°C (77°F) in the original unopened containers, this product has a usable life of 24 months from the date of production. This is one kind of amino silicone oil. One good silicone material for hair care. It can also to be made to amino silicone oil emulsion.

LP-8566 Amino Fluid Amodimethicone For cosmetic formulations and shampoos Product features & Benefits: 1. Stable in a wide range of cosmetic formulations, Improve color depth and longevity when used in semi-permanent color product 2. Enable clear shampoo formulations Provides smooth, feel to dry hair; Improves shine in shampoos, Improves wet and dry combing, Decreases fly-away, Protects hair from heat damage 3. Enables cold process manufacturing Chemical Name:Aminofunctional polydimethylsiloxane INCI NAME: Amodimethicone This is one kind of amino silicone oil. One good silicone material for hair care. It can also to be made to amino silicone oil emulsion.